This SEPAC stationary field tooth clutch is designed to operate both dry and in oil. Bearings are sealed, permanently lubricated and do not require a grease fitting like some competitive clutches.

ELECTROMAGNETIC ROTATING FIELD TOOTH CLUTCH
Model - RFTC

This SEPAC rotating field tooth clutch is designed to operate both dry and in oil. No bearings are used. Current is supplied to the magnet body coil through an electrical brush and slip ring. (Grounding is accomplished internally through the magnet body to the machine shaft.)

ELECTROMAGNETIC WALL MOUNTED TOOTH CLUTCH
Model - WMTC

This SEPAC stationary field tooth clutch is designed to operate both dry and in oil. There are no bearings in this model which makes it suitable for higher speed applications.

ELECTROMAGNETIC STATIONARY FIELD TOOTH CLUTCH COUPLING
Model - STCC

This SEPAC stationary field tooth clutch coupling is designed to operate both dry and in oil. It features a sleeve and output curb which supplies installation gently as compared to other models.

ELECTROMAGNETIC SPRING ENGAGED TOOTH CLUTCH
Model - SETC

This SEPAC stationary field spring engaged tooth clutch is designed to operate in both dry and in oil. Bearings used are sealed, permanently lubricated and do not require a grease fitting like some competitive clutches.

ELECTROMAGNETIC SPRING ENGAGED TOOTH CLUTCH COUPLING
Model - SECC

This SEPAC stationary field spring engaged tooth clutch coupling is designed to operate both dry and in oil. It features a sleeve and output hub which simplifies installation gently as compared to other models.

This SEPAC stationary field multiple disc clutch is designed to operate both dry and in oil. Bearings used are sealed and permanently lubricated, and do not require a grease fitting like some competitive clutches.

This SEPAC rotating field multiple disc clutch is designed to operate both dry and in oil. No bearings are used. Current is supplied to the magnet body coil by an electrical brush through a slip ring. (Grounding is accomplished internally through the magnet body to the machine shaft).

This SEPAC model "wet" clutch offers a wide selection of sizes, simple mounting and operation. The ERD clutch is recommended for applications in an oil atmosphere. Both 24VDC and 90 VDC units are available. Maintenance free operation is featured since all wearing parts are hardened and the clutch automatically compensates for wear of disc pack.

This magnetically engaged clutch was specifically designed for steel mill screw down and other heavy industrial applications.

The spring engaged, magnetically disengaged clutch was specifically designed for mill screw down applications.