Power Supplies Print E-mail

SEPAC POWER SUPPLIES


24 Volt DC Silicon Rectifier

10 Volt DC Diode Bridge Rectifier



24 Volt DC Rectifier
Model P/N L W H M V S Weight
24 V 1.0 amp 80006 3.40 3.28 5.0 2.625 2.625 4 #6-32x1/4"
deep mtg. holes
2.5#
24 V 3.0 amp 80007 4.15 3.33 7.0 2.750 2.562 4 #10-32x1/2"
mtg. studs
4.3#
24 V 5.0 amp 80012 4.15 3.33 7.12 2.750 2.562 4 #10-32x1/2"
mtg. studs
7.0#
110 V 10.0 amp 80001 2.00 2.00 3.50 - - - .4#
12 V .4 amp 80019 3.4 3.28 4.67 2.625 2.625 4 #6-32x1/4"
mtg. studs
2.5#



110 Volt Rectifier

SPECIFICATIONS

Input Voltage: 0-125 VAC, 50-400 Hz, single phase (110 v 25-60 Hz)
Load Regulation: Nominal voltage is based on 115 VAC input with approximately one-half load. At no load, the output voltage will be reduced by approximately 10%.
Line Regulation: Output voltage is directly proportioned to input voltage chnges.

Polarity: Output is floating; either positive or negative terminal may be grounded.

Ambient Operating Temperature: -10 to +65°C. No derating required.
Storage Temperature: -55 to +85°C.
Installation: Plugs into standard octal socket.
Transient Protected: Solid state arc suppressor.



PIN CONNECTIONS



OTHER ELECTRICAL CONTROLS ARE AVAILABLE.
CONSULT SEPAC ENGINEERING FOR OTHER POWER SUPPLY NEEDS.